Tested, documented modules for protection, regulation, and battery management. Skip the power-design detour and get back to the product you’re actually building.
Overvoltage, undervoltage, overcurrent, and reverse protection in one hardware-only module. 7 to 60V, up to 28A, with adjustable thresholds and ideal-diode reverse blocking.
You meant to work on the thing you’re building. Instead you’re three datasheets deep in protection and regulation, and if the power stage fails at the demo, that’s on you.
The $3 buck converter works on your bench, then dies the day you show the build to someone, with no documentation and nobody to ask.
Every module is designed around the failure modes that actually take systems down, then individually QC tested and documented on its product page with the specifications and integration notes you need to design it in with confidence.
Full-featured protection for 7 to 60V DC systems up to 28A, covering overvoltage, undervoltage, overcurrent, and reverse
Adjustable 5 to 30V overvoltage cutoff up to 25A, now more compact, with ideal diode reverse blocking and a fault output
Compact overvoltage and overcurrent protection for 3.3V, 5V, or 12V systems up to 5A
Triple synchronous buck converter with 12V (10A), 5V and 3.3V (5A) outputs from 14.5-52V input
Battery power usually means wiring a charger, a protection circuit, a fuel gauge, and a regulator together and hoping they cooperate. Battery Pal does it all on one board, with the protection silicon used in phones and laptops.
Specifications, dimensioned drawings and annotated board diagrams, on every product page. The kind of documentation you’d create for your own designs.
Email us with your integration question. You’ll hear back from the people who designed the module. Volume and custom inquiries welcome.
Ethan was a lead electrical engineer taking products from prototype to mass production, losing weeks on every project to circuits that should have already existed.
Nick was in a university battery research lab, but most of his time went to power circuits and protection hardware just to keep experiments running, not to the research.
We met building a fully autonomous sailboat to cross the Atlantic Ocean, kept solving the same power problems, and realized every hardware developer faces the same friction. That’s what PN Labs exists to fix: the power foundation, handled, so you can focus on what you’re actually building.
Power electronics is easy to get dangerously wrong, and one fault can take the rest of your system with it. We cut no corners on safety, protection, or reliability, so the power layer is the one part of your build you can stop worrying about.
Have a question first? Contact us. We actually respond.